-
We are now at a point were we need to be able to provide live status information for charging equipment via Open Charge Map.
Primary Requirements:
- Provide near-real time status (availability/status…
-
### Is your feature request related to a problem? Please describe.
Hello, is it possible to connect an external sensor for temperature monitoring?
The easiest would probably be a DS18B20.
### Des…
-
A possibility for powering the microcontroller for e.g., the color sensor:
https://www.canadarobotix.com/products/2761?srsltid=AfmBOooxDHrNvKuctEIGHWXeIHusmvp-t7ae6e-OptdjdnoMbGhULSo7
https://www.ad…
-
Hey, just wondering if there is a way to implmenet a refresh, i appreicate there is a default refresh time of 7200 minutes but i have an automation which triggers when my pod point charger is connecte…
-
### General
Affected tag(s) to be modified/added: [ref:EU:EVSE](https://wiki.openstreetmap.org/wiki/Key:ref:EU:EVSE)
Question asked: **Which IDs does this charger have?**
### Checklist
C…
-
### Category
WiFi
### Hardware
T-Watch
### Firmware Version
2.5.5.e18 (alpha) and 2.5.4.8d (stable)
### Description
watch is looping and cannot enable wifi. tried to enable wifi to get time syn…
-
Move temperature monitoring and throttling responsibility from OpenEVSE controller to ESP32 leaving the OpenEVSE controller only monitoring for emergency shutdown at 72C.
The temperature monitoring…
-
### Discussed in https://github.com/WillCodeForCats/solaredge-modbus-multi/discussions/564
Originally posted by **mikedeluca** March 27, 2024
So I was digging around to try to figure out why s…
-
## Description of the issue
I would implement three concepts for losses of energy transfer.
1. charging losses
2. discharging losses
3. self-discharging losses
## Ideas of solution
Energ…
-
I purchased the PJLIPO_12000 and have it installed and generally working. I've set a recurring alarm that wakes it, does some work, and shuts down the Pi. All of the above is working.
I have a mess…