-
Hi Jan - great work on RadioLib. Currently I'm migrating from another library (*cough* RadioHead) and integrating RadioLib with the Heltec Cubecell ASR-650x series - either ASR-6501 or ASR-6502. Follo…
-
Just trying to get my SX1262MB2CAS shield working w/ an Arduino Uno. One of the commands is failing during the begin command.
The only thing modified here is the `radio.begin` call, which I belie…
TJ178 updated
2 years ago
-
Hi, first of all I am loving your project, I did not succeed that my own firmware was able to talk to TTN v3 until now...
Using your software was successful, but exhibited some other quirks. I am u…
-
hello again,
is a chance to use another LED for a case?
I build the cubecell in a case, and want a extern LED for info.
just a question, feel you free to say no..
many thanks
-
```c++
/*
RadioLib SX126x Transmit Example
This example transmits packets using SX1262 LoRa radio module.
Each packet contains up to 256 bytes of data, in the form of:
- Arduino Stri…
-
I am experimenting with the HelTec CubeCell boards, which have Arduino support.
The RadioLib library doesn't compile, so I assume it isn't supported when targeting these boards.
(They use the sx126…
-
After looking at the softSerial.h and softSerial.cpp files, the `write` member seems to be return type of `size_t`, which seems to cause this error.
Is there something I'm missing about sending a…
-
According to Semtech **"the low data rate optimization is usually recommended when a LoRa® symbol time is equal or above 16.38ms" (SX1261-2 Datasheet Rev. 1.2 06/2019, page 39 num. 6.1.1.4**
Your `…
-
I'm trying to show a charging state indicator using a calculated value. I have a mini lora weather station based on a Heltec cubecell dev board, which doesn't provide charging information on it's own.…
-
Arduino Due currently has no internal support for `tone()`, which is required for AFSK. There's an open PR in the core (https://github.com/arduino/ArduinoCore-sam/pull/108), once it's merged, `RADIOLI…