-
Hello,
I am actually creating a Digipeater using Direwolf on a Raspberry Pi 2.
Once Direwolf is installed, when the terminal starts, Direwolf display is blinking.
Here is how I have installed Di…
F4FVI updated
3 years ago
-
I would hazard a guess that most ARM devices running Direwolf today aren't Raspberry Pi 1s. Most newer systems easily support the full-rate demodulator. Getting full sample rate on these devices requi…
-
Hi,
when i check display, I do see incoming APRS messages from several ID´s.
So, decoding is working, but then I check, which ID`s have been forwarded to APRS, I cannot see a single one:
e.g, 07…
-
Hello,
I'm trying to figure out how to adapt the code to the ttgo tbeam as it seems a nice device for aprs use.
I've disabled the aprsIS and wifi part to be able to fit the code in the tbeam, the i…
-
Hi All im trying to build the above following the guide https://godseyonline.net/raspberry-pi-direwolf-digipeater-igate-soundcard-version/
All working apart from I cannot get the auto start to work..…
-
Hi All im trying to build the above following the guide https://godseyonline.net/raspberry-pi-direwolf-digipeater-igate-soundcard-version/
All workign apart from I cannot get the auto start to work…
-
Just a quick comment: I wanted to use Smooth with the latest ESP-IDF stable (4.1) version via PlatformIO for a big project.
In PlatformIO I can't switch to the latest (dev/unstable) version of ESP-ID…
-
I'm using Direwolf 1.5 on Raspberry PI 3 with Ubuntu 18.04
All seems to be working fine, except that I can't insert any delay between receiving and digipeating packets. Basically digipeating start im…
-
If Dire Wolf fails while the GPIO is triggered for transmit, the GPIO stays active even though Dire Wolf has closed and restarted automatically. Big issue if we don't want continuous transmissions.
V…
-
Greetings,
When using Direwolf 1.6G from the DEV branch (downloaded and compiled on 6/19/2020) on HF/300 Baud, the transmission times when FX.25 is enabled on transmit is significantly longer - nea…