-
When the Radio is on, we can mute it but not turn it off.
Could you add a Standby button so we can tap screen and press Standby button?
This would put device into Sleep mode.
Then can be woken up b…
-
Tracking updates of www.redditgifts.com
-
Hello, I found some weird things on these two functions again. I understand they must be becoming PITA already, so do what you can, when you want, of course, but I think these are one of the few most …
-
### DB Selector
DB3K
### Affected DBID(s)
#3245 Cobra
### Summary of Changes
frequency: | C-Band 4-8 GHz
beamwidth: | β=1,8° ε=1,4°
[https://www.radartutorial.eu/19.kartei/04.battle/k…
-
# 每日安全资讯（2023-07-08）
- 先知安全技术社区
- [ ] [开源许可证保姆级入门手册](https://xz.aliyun.com/t/12671)
- [ ] [JAVA安全初探(三):CC1链全分析](https://xz.aliyun.com/t/12669)
- HackerOne Hacker Activity
- [ ] [Arbitrary file …
-
I observed a significant increase in ICMP ping latency **after** a big file (~100MB) was transferred.
## My Setup
- ESP32c3 chip
- OpenWRT v21 linux-host
- First-Generation (latest master)
- …
-
Hello mstrens,
just played version 2.3.0 on my testboard, with protocol Jeti J it works with MS5611 and Beitan GPS220.
As a test I only changed the protocol to Jeti EX Bus, then I don't see the sens…
-
First of all, for those who don't know you can set `verbosity=10` [here](https://github.com/robotastic/trunk-recorder/blob/master/trunk-recorder/recorders/p25_recorder_decode.cc#L87) to see raw P25 vo…
-
I used paex_wmme_ac3.c to play the ac3 file on spdif successfully. But I tried to modify some parameters to play the eac3 file, but failed. Do the hostapi of wmme support eac3 passthrough, and how to …
-
I'm just not sure from the very limited html documentation how one uses this library. How would one go about loading in a 3d world and running a simulation to produce sound?
I see a lot of MatLab, …