-
I get the error in icestudio with UPDuino V2.1 ( it can upload when I use icestick)
It…
-
I've one of these cards. I bought it for fun, also, as a gamble, in case it performed OK at the price point (irrespective of the labeling). Even with poor performance, I wished the card was reliable. …
xenek updated
4 years ago
-
```
What steps will reproduce the problem?
1. Create a 69kb .bin file
2. Load Programmer_USBKey.out
3. Program the .bin file to EEPROM
What is the expected output? What do you see instead?
When the .…
-
Hi,
I've received several EEPROMs from Ebay, but I'm only able to program one of seven AT28C256.
Of course these are weird fakes or old dead ones, but I have tried to software erase those or disable…
-
hi,
thanks for the burnLVP project. Being in a scripting language makes it easy to modify.
i was able to use it to burn PIC4550 using Rpi.
i then started to see if i could use it to burn the PIC usin…
-
```
What steps will reproduce the problem?
1. Create a 69kb .bin file
2. Load Programmer_USBKey.out
3. Program the .bin file to EEPROM
What is the expected output? What do you see instead?
When the .…
-
Hello. There is [IMSProg](https://github.com/bigbigmdm/IMSProg) software for modern programmer device. I suggest you to check is it good idea to adopt this software for your Relatively Universal-ROM-P…
-
deepin 20
普中c51单片机 已在windows测试过单片机烧录没问题
python环境已配置，端口握手不成功，不知道是不是波特率的问题。
烦请解答一二，感激不尽
切换至最高波特率:
Traceback (most recent call last):
File "/home/mysa/tool/stcflash/stcflash.py",…
-
hi. i have a problem to program the at28c256 eeprom. with the at28c16 works perfectly . I have read in its datasheet that there is a write protection to unlock with a sequence of byte in some register…
-
Hi! I believe I have been able to successfully program the Flash as well as the ATMega for the programming interface, but I am unable to understand why I am getting the results I am currently. Here is…