-
### What happened?
I tried to pair the RCU from Eglo (https://media.adeo.com/marketplace/LMFR/83330031/f2e1c7aa-eb2e-4b4d-94b9-1d7258832444.png?width=1920)
Detected as a light bulb instead of a …
-
### What happened?
Paired this bulb https://www.eglo.com/en/bulb-12577.html
which should have color temperature control, but does not in zigbee2mqtt (it's there in zha). It's identified as 33951/…
-
Hello @fsaris.
I have discovered a new issue when updating HA to 2022.7.0.
Unfortunatelly I have no logs because I have immediatelly rolled back to 2022.6.7 and aftetr rollback everything is fine.…
-
Hello,
Because my lamp was no longer active in the AWOX Android app, I decided to delete it and add it back. This also meant resetting the lamp itself.
After this whole ordeal, when I delete and…
-
Hello,
I have 10 AwoX GU10 bulbs (Eglo Crosslink-z 33946 PAR10 GU10).
Some are recognized as: "manufacturer Id": 4417, "manufacturer Name": "AwoX", "model": "33944"
And others in: "manufacturer Id"…
-
Hi to all,
I recently added my Eglo Lights into HACS, essentially all good and happy about it.
Although 2 Lights are not appearing for now, unsure if the error is with me or if there is an issue…
-
Hello,
If I may suggest to put the Awox connect plug plus on your highest priority followed by the adoption of the same rooms as in the Awox app would open a world of possibilities.
The plug is a wi…
-
Ok so again I have no response from lights and "No device connected" in log.
![image](…
-
Hi,
i have two Eglo RGBW spots and an Eglo Smart Plug Plus. When I add the integration, both entities are displayed, but only one spot works at a time! The other is always shown as unavailable (alw…
-
Hello
This is my first post so be gentle pls.
CASE: AwoX E27 Tunable White RGB bulb under brand EGLO is not allowing for tempcontrol of LEDs.
Model number on the box ID 33944.
First you need to…