-
> -- EDIT BEGINS --
> The solution for v0.20.x and v0.21.x is to use: `ramses_rf.send_command` instead.
> -- EDIT ENDS --
Hi,
Have
- Nuaire Drimaster PIV
- Nuaire DRI-ECO-4S (4-way switch)…
-
[Mike Henderson](https://community.home-assistant.io/u/Mike_H)
[HA Community post](https://community.home-assistant.io/t/honeywell-ch-dhw-via-rf-evohome-sundial-hometronics-chronotherm/151584/3365?u=…
-
### The problem
I tried to link a statistics graph card to climate sensor through "Honeywell Total Connect Comfort (Europe)" integration. But the sensor is not listed. Found this reference to this si…
-
I noticed that new package (2023.10.4) depend on missing packages:
**- dev-python/protobuf-python-4.24.3**
**- dev-python/pydantic-1.10.12:0** (upgradable to **1.10.13** in official portage)
and …
-
Trying to visualize the "faultType" or also "Since" attribute in this entity.
But nothing is visualized, even if i put comma between same value two times.
If i put this in data:
```
columns:
…
-
### The problem
Something is blocking Home Assistant from wrapping up the start up phase. We're going to continue anyway. Please report the following info. No issues in usage or execution noticed s…
-
### The problem
From logs (I have replaced sensitive info with x)
```
Logger: homeassistant.components.script
Source: components/script/config.py:212
Integration: Scripts ([documentation](https…
-
`2023-04-20 13:30:38.501 WARNING (MainThread) [ramses_rf.protocol.parsers] I --- 30:071715 --:------ 30:071715 10E0 038 000002FF1E02FFFFFFFF100107DF110A07DE496E7465726E6574204761746577617900000000 < …
-
### The problem
When the location climate is set to Off the zones get the set point set to 5 degrees, but the operation remains auto in the Lovelace card en is empty in the details view.
…
-
Short question. Is it possible to use this evofw3 in Domoticz combined with a nanoCul? If yes is there some guide on how to do this?