-
After it shows:
- Starting X server
- Launching GNU Radio Companion
nothing happens.
I've installed Python and XQuartz.
-Rolf
-
Hi, I'm new to gnu radio so I apologise if this is a misguided question.
I've been looking at gr-adsb as a learning exercise, using a hackrf as the sdr. I'm seeing very occasional reports in the te…
-
### What happened?
Placed Multiply Const block in a flow graph. Select the block and try to change the IO type by using up / down aarows. Fails to change type. Changing IO type has to be done by d…
-
### Checklist
- [X] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the resul…
-
After using GNUradio 3.7 and 3.8, I installed the latest Gnuradio version 3.10.10.
I tried several times to utilize the Dynamic Channel model block on 3.10.10, without success.
While on 3.7 and 3.…
-
Hello,
I saw in video [on youtube](https://www.youtube.com/watch?v=psuEzxFJnZY) ( time : 13:15) of a gnu radio receiver that automaticaly catch the biggest amp signal and select it. It could be rea…
-
### What happened?
After using GNUradio 3.7 and 3.8, I installed the latest Gnuradio version 3.10.10.0
I tried several times to utilize the Dynamic Channel model block on 3.10.10, without success.…
-
Would love to use my XTRX on my macOS laptop in the same way that I use my USRP B205mini-i (e.g. with GNU Radio and GQRX).
-
The GNU Radio blocks [```Sequence Correlator```](/inIT-HF/gr-corrsounder/blob/master/grc/corrsounder_seq_correlator_cc.xml) and [```Sequence Source```](https://github.com/inIT-HF/gr-corrsounder/blob/m…
-
Hi, I can't run osmocom_fft
$ osmocom_fft
Error importing GNU Radio's wxgui. Please make sure gr-wxgui is installed.
$ brew install wxmac --python
Warning: wxmac-3.0.2 already installed