-
Dieser Fehler wurde von einer benutzerdefinierten Integration verursacht
Logger: custom_components.wemportal
Quelle: custom_components/wemportal/coordinator.py:67
Integration: Weishaupt WEM Porta…
dm82m updated
6 hours ago
-
## additional Sensors
In your readme you mentioned: _There are several entities that are not..._ I have found these two - so "several" = 2 right?
- sensor.heatpump_power [https://github.com/flautz…
-
I've spent hours working with FLSUN to fix the firmware for my custom QQ-S Pro with an MKS Robin Nano V3.1 and a TS35 V2.0.
I have the Homing fixed except, if I offset any axis by a small amount ma…
-
Hello,
So, in my process of starting using criterion, I've noticed something: the CPU heats, and heats makes frequency scaling have an impact. Between two runs with the same code, I can have as muc…
-
I am able to connect and print with the creator pro 2, but when I try to print a file in duplicate or mirror mode, only one extruder moves, but both heat up.
I also can not save files or access the S…
-
I have been doing some experimenting with my heat pump. I found if you send a request packet (0x42) with a 0x09 in byte 5 (0xfc is 0) you get a packet with a few info bytes. Here is what I found so …
-
My printer started to stop mid print saying something like klippy has been restarted, trying to open up the web interface hardly connects and it also has issues with wifi conectivity and transfer rate…
-
Hi guys, I'm Felipe, from Chile... I hope you can help me with this issue, I'm new in the arduino/esp8266 and open source/github world... So this is my first time here hahaha...
I have been working…
-
# Retailers
## Comparisons
- https://www.choice.com.au/shopping/shopping-for-services/utilities
- https://www.choice.com.au/shopping/shopping-for-services/utilities/articles/shopping-around-for…
-
### What happened?
Zigbee2MQTT periodically report error zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT then restart.
### What did you expect…