-
One of the main improvement of libusbk.sys vs libusb0.sys is that it has better isoc transfer support.
libusb0.sys may only work with full speed isoc transfer and not really with high speed or supe…
mcuee updated
5 months ago
-
Hi all --
This may not be a bug, but I'm tearing my hair out trying to figure out where things are going wrong..
Sample Project here: https://github.com/cmoski/DllExportErrorExample
I'm getti…
-
```
help, i am using ubuntu 12.04 to run the LKB, but i have a problem,
1) when i run sudo ./LKB without connecting the kinect, the lkb program runs
o.k and loads up the interface but It doesnt dete…
-
WiFi eats a lot of flash and nearly all of the RAM. The resulting flash is unreliable and flashing hangs at flash erase. But more importantly there's not enough ram left for a useful application.
`…
-
https://app.codecov.io/gh/getsentry/sentry/bundles/master
Asset trends do not have measurements for some reason
-
Hello,
I cannot get RPI4b + Inateck HB2025A switching off ports. I purchased HB2025A knowing that RPI4 ports are ganged. I plugged HB2025A on USB 2 RPI port (following guidance from https://github.…
-
### Describe the bug
For small memory devices and tons of applications that rely on most common USB NAND storage devices using OpenWrt in Extroot is missing any opportunity to run e2fsck with custo…
-
Hello, so I tried to get the OV7670 running on the Heltec Wifi Kit 32 and also on a normal esp32.
The problem is I'm getting following Code spit out when flash monitoring:
```
I (29) boot: ESP…
-
### Operating System
Linux
### Board
Custom board with STM32H730 and USB3343
### Firmware
tinyusb 111515a
FW based on custom RTOS, no caches
should not be relevant for this case
tu…
-
Hi,
Since some time ago I had the feeling that there was some kind of problem when using highspeed SIO routines.
As you will know a highspeed SIO routine queries a speed byte from the drive in n…