-
The [rp2350 SVD file](https://github.com/cmsis-svd/cmsis-svd-data/blob/main/data/RaspberryPi/rp2350.svd) has a long, multi-line description tag inside the root device element:
```
Raspbe…
-
Hi,
currently I am experiencing issues with postmarket OS on my Xiaomi Redmi 5 Plus. I am using a dual-boot configuration with lk2nd flashed to recovery and postmarket OS flashed on an external SD …
-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
-
I am using the I2C outputs of an Arduino R4 minima board to make it communicate with other boards. I notice that the `Wire.end()` function does not seem to work. I commonly use this instruction to alt…
-
The hatlabs website page about the sailor hat says there is a solder jumper to disable the watchdog but I can't see one. The docs explain how it works but they don't say where it is. All the other jum…
-
### Windows Version
Microsoft Windows [Version 10.0.19045.5011]
### WSL Version
WSL version: 2.3.24.0
### Are you using WSL 1 or WSL 2?
- [x] WSL 2
- [ ] WSL 1
### Kernel Version
Linux version …
-
### Describe the bug
I have installed version 3.2.4 and a DHT22 sensor, when running in ESPresence it returns nan values for the Temp and Humidity.
When I use the same sensor on a different board, s…
-
Hi,
I have no issues using the HTU21D, but when I run `[hex(x) for x in i2c.scan()]` it does not show up in my list of i2c device addresses (i.e. I do not see '0x40' anywhere). Running `sudo i2cdet…
-
### Subject of the issue
I have used the libray to access a SC7A20 accelorometer but all of a sudden it fails to connect to the device and I can't figure out what's changed, it was working fine
##…
-
Keyboard:
- RGB: `openrgb`
- optional: `i2c-tools` for Mainboard, RAM, GPU etc.
- optional: `openrazer-driver-dkms` for Razer devices
- Configure via GUI and save profile
- Load profile o…