-
Hi,
i have a little problem, the screen is working very but the touch screen does no work and when a run xinput_calibrate a get this
DEBUG: XInputExtension version is 2.2
DEBUG: Skipping virtual mas…
-
I have Waveshare 3.2inch RPi LCD (B) V3 connected to Raspberry Pi Model B+
http://www.wvshare.com/product/3.2inch-RPi-LCD-B.htm
http://www.amazon.com/Waveshare-Raspberry-Resistive-Interface-Rapsberry-…
-
firstly thank you for your work.and i have a problem. cube working fine. it seems drawstring have a problem. everything flipped its not working correctly. can you help me ?
-
Good to see this go into staging! The screen model is a waveshare32b. I was able to get buildroot to work fabulously in buildroot through peter seiderer's patch in this mailing list http://lists.busyb…
-
Hello,
I'm using yocto to create my distro for raspberry pi everything is ok, except one thing that i don't understand, as you can see in picture below, the fbtft_device module is loaded ok at around…
-
I got the Adafruit 2.8" PiTFT Capacitive Touch setup working from this guide:
https://learn.adafruit.com/adafruit-2-8-pitft-capacitive-touch/capacitive-touchscreen
The display turn off after 30 minut…
-
Hi,
Sorry if I have posted to the wrong location.
I have an AdaFruit 2.8 (http://www.adafruit.com/product/1601) that I am trying to use with a BeagleBoneBlack.
I have followed the instructions from…
-
Hello.
I wish to use PiTFT Mini Kit on Rpi 2.
I followed the instructions and did that:
sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update
reboot
This is my config.txt:
dtparam=i2c_arm=…
-
Hi, I'm working on a Raspberry Pi project featuring this small OLED ( https://www.adafruit.com/product/1431 ).
I can't seem to find any driver for this display for the Raspberry pi, but when I asked o…
-
The FBTFT framebuffer drivers for small LCD displays, is now accepted in the staging tree:
https://git.kernel.org/cgit/linux/kernel/git/gregkh/staging.git/tree/drivers/staging/fbtft?h=staging-testing
…
notro updated
9 years ago