-
I have tried setting my parameters like so for my raspberry pi zero 2 w running retropie and my generic ili9341 display (https://www.amazon.ca/Module-daffichage-ILI9341-fonction-tactile/dp/B07BDML7LM/…
-
Столкнулся с проблемой, возможно Вы сможете подсказать в чем проблема.
1)
Использую https://github.com/libEmGUI/emGUI-arduino.git
Платформа - Stm32Duino (http://wiki.stm32duino.com, https:/…
-
Will the oled_cli program work with ili9341? Thanks
-
You are wondering on how to get a SPI display to work? Yeah me too so I hope this quick guide will help you.
I did this using a Waveshare 320x240 LCD IPS screen. [This is the pinout I used which is…
-
hi,
we tried lv_portesp32 on esp32 wrover-kit board , the version we had is not v4.1 but a older version of the kit.
The lcd image is mirrored ( attached are config screenshots),
tried all orie…
-
I use ESP32 CAM.
> User_Setup.h
```
#define ST7789_2_DRIVER // Use this definition for ST7789v2
// Define the display size
#define TFT_WIDTH 240 // ST7789v2 240 x 240 pixels
#define …
-
Hello, I successfully used ILI9341 standard Adafruit Library on a ILI9488 display.
Unfortunately your library don't work whit the small corrections I found to adapt the standard library.
Any sugge…
-
Hello,
I meet an issue and hope you can help 😊, thank you to read me.
I can’t generate te fbcp-ili9341 driver for my Whaveshare 3.2C display.
i follow instructions to generate it , but
the scri…
-
I'm using lastest verison of TFT_eSPI lib with an ESP32-WROOM-32 Devkit.
It just declares the header as #include and nothing more.
When attempting to compile the project, the following error is d…
-
Hi,
I connected an SPI display with touchscreen to my raspberry, it's an ILI9341 2.8" with XPT2046 touch controller;
it works fine in the installed OS with this options:
`dtparam=spi=on
dtoverla…