-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
mcuw updated
2 months ago
-
The board clearly has 16MiB flash, however the given arduino examples only work with 8MiB. When I manually change to 16MiB in platformio.ini the board report flash error on boot.
-
There is some inconsistency in the Lolin S2 Mini plate.
The chip itself may have freely configured pins as i2c, sleep, uart, and the tile itself has no descriptions, only numbers.
Some of the …
bato3 updated
6 months ago
-
LilyGo has added ST7789 support for their parallel display on the T-Display S3 here:
https://github.com/Xinyuan-LilyGO/lilygo-micropython/issues/16
Any chance someone can write a driver for this…
hemna updated
2 months ago
-
The examples are not working with my T-Display S3 AMOLED V2.0 board. I tried a few of LILYGO's LVGL examples and those work fine, so I guess the board is ok. I don't want to learn how to use LVGL. Is …
-
Hey, Sean!
Looks promising! For someone that claims to be just starting, you're getting a lot of things right, but I hope you're open to some help awesomeizing things here and there. It's late and …
-
Here are all the things I discovered in my attempt to get everything working on this board with ESPHome. Hope it helps someone if you learn something interesting please share back.
ESPHome working …
-
I bought a LilyGo Soldered pin S3 board no touch screen.
I am using Mac Monterey 12.6.3 M1 and Arduino IDE 2.0.5.
I am using the example `arduino_gfx_demo` to test the board.
If we analyse the cod…
-
Heya,
I managed to get one of these things running esphome-kickstart but haven't been successful in getting a more robust config installed. Any chance you have some guidance on how to make this wor…