-
1. Please add support for the Waveshare ESP32-S3 Touch LCD 4.3 ( 800x480 ): Pinout and specification: https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-4.3
2. TFT_eSPI doesn't support the above inter…
-
My work flow started from squareline studio using the makerfab simplified template for the MaTouch 7 standard. Exported the UI and copied into a new platformio project. All the library moved to platfo…
-
Schematic diagram
[jc3636w518.zip](https://github.com/user-attachments/files/16201959/jc3636w518.zip)
-
Good evening, I used the compiled version "esp32-2432s028r_full_4MB_v0.7.0-rc9_c200edf" correctly on my device, now I have updated to the rc12 version but unfortunately I have display problems on the …
-
I'm unable to determine why display updates often flash and glitch, even though I'm (hopefully appropriately) using double buffering.
![IMG_6088 2024-04-21 23_32_11](https://github.com/kdschlosser/…
-
Hi,
I was able to successfully build und flash an ESP32-S3 with octal-SPIRAM, but I am not able to connect to the board after flashing the firmware. I think I am missing something, but maybe the sp…
-
SPI.Bus initialization has some weird things for me...
The code below
- sometimes works fine,
- sometimes causes reset
- sometimes gives me this error:
```
MPY: soft reboot
PIN_MOSI =
PIN…
-
Now I use ESP32 and ST7796 (320*480 spi or 8Bit hardware interface screen)for display control, and the interface is an 8bit interface. I see the 8bit interface definition described in User_Setup.h fil…
-
Hi,
This is more of a question, than an issue.
As far as I can understand, most 4827S043C boards does not have the Interrupt pin "enabled" by default.
You would have to bridge R17 (connect GT911 …
-
### Board
ESP32-S3R8 SoC custom board
### Device Description
ESP32-S3
### Hardware Configuration
RGB interface GPIO
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE
###…