-
Hi
i'm Using your Library with a ESP32 Wroom 32 Board and an MAX98357.
Works as expected.
I like to use the same Setup with a ESP32-S2 Solo Board (cause of the internal USB-HW). the exactly s…
-
I'm intrigued by the new TTGO T-Display-S3 with 1.9" IPS. It uses an ST7789 but via an 8-bit parallel i/f.
Any idea of supporting this? Even TFT_eSPI doesn't, but LilyGo has patched the lib. I think…
-
## Environment
- MCU or Board name: Makerfabs S3 Parallel16
- Panel Driver IC: ILI9488
- Bus type: Parallel16
- LovyanGFX version: latest develop
- FrameWork version: ESP-IDF v5.…
-
I have a 16b parallel ST7789 panel hooked up to an ESP32-S3 but it doesn't display anything. The driver for the ST7789 does not appear to be fully completed. I also have a ILI948x hooked up to ESP32…
-
It is then relatively easy for most hobby/amateur-tinkers to solder the parts by hand as it only has very few simple component, see:
https://www.youtube.com/watch?v=HUmbvfqP784&ab_channel=chadausti…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
*Sent by Vic Dohar (vicdohar@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
Hello,
This is my first time asking for assistance and hopefully this is an acceptable channel of…
-
I have written a rudimentary Micropython driver for the ESP32 using displays that have either an 8bit or a 16bit parallel interface. It does work, cleaned up and refactored to get the best performance…
-
*Sent by (dccextended@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
## glen created a ticket
Name: glen o'connor
Email: ghoconnor@icloud.com
Timezone: 10
Software: EX-Comma…
-
Is there support for touch coordinates that don't match the screen coordinates (e.g. touch area extends beyond the visual screen area)? I don't see a way currently to calibrate the values.