-
### Steps already tried...
- [X] Tried a clean install (empty `.bin` files are included in the ZIP)
- [X] Tested previous/other build (mention which one already tested)
- [X] Tested on other node t…
-
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduino-esp8266.readthedo…
-
Feature/device support request.
**Describe the solution you'd like**
Ability for users to be able to easily select sensor on menu, and set parameters for controlling a CO2 tank regulator via use…
-
Уважаемый Илларион.
Спасибо Вам за программу. Скажите пожалуйста, версия доступная для скачивания не имеет шкалу реального времени, есть просто посекундная шкала. Но на скриншоте по ссылке на докумен…
-
Currently there are 2 detection ranges you can select/set 2000ppm and 5000ppm see
https://github.com/UedaTakeyuki/mh-z19/wiki/CALIBRATION-&-detection-range
in the datasheet v1.5 in chapter 5 on p…
-
Hi there.
I'm new to nodered. I hooked mh-z19 and installed your node. I also use dht22 sensor on raspberry pi and I thought this was the issue. So I unplugged it but the problem is the same. I loo…
-
I am thinking about adding a CO2 sensor to my environment.
I saw that you already have support for a COZIR sensor, but that is a little pricy.
I also saw support for a K30 sensor, but I am not able…
-
Is it possible to use this library with Python 3 without sudo?
When I use "import mh_z19" and "mh_z19.read()" in my program it doesn't work. Although I have activated the serial port (just as you …
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Hass.io
**ESP (ESP32/ESP8266, Board/Sonoff):**
WEMOS D1 Mini Rev 3.1.0
**Affected component:**
https://esphome.io/c…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
ESPHome 1.14.0, Hass.io, Virtualbox
**ESP (ESP32/ESP8266, Board/Sonoff):**
[SparkFun ESP32 Thing](https://cdn.sparkfun.co…