-
## Issue template
- Hardware description: Olimex board with STM32
- RTOS: NuttX
- Installation type: micro_ros_setup
- Version or commit hash: foxy
#### Steps to reproduce the issue
I foll…
-
Hi,
Following the tutorial (verbatim) I've flashed my Olimex-STM32-407 board and built the micro-ros agent.
during building the agent for the first time I gave me "error" message output, and after s…
-
## Issue template
Hardware description: Olimex STM32-E407
RTOS: FreeRTOS
Installation type: micro_ros_setup
Version or commit hash: foxy
#### Steps to reproduce the issue
1. …
-
Hello,
I want to generate static library for STM32G474 series. I know that this microcontroller is in CortexM4F family and this is not listed in [this links](https://github.com/micro-ROS/micro_ros_…
-
Hi. I try to repeat the steps and on your **sample_main** application got an **HardFault** when call **_rclc_support_init(&support, 0, NULL, &allocator);_** Also I added **-specs=nosys.specs** to Make…
-
ping_pong is unmodified from freertos_apps/apps/ping_pong/ (dashing branch)
To configure I used...
ros2 run micro_ros_setup configure_firmware.sh ping_pong --transport serial --dev 3
It builds.
…
-
Hello @pablogs9 ,
I followed your instructions as in #121 and I was able to build the firmware. However, while flashing it gave me an error.
These are my connections:
![image](https://user-i…
-
Error output with appMain thread open.
with no idea of gdb in linux with openocd so I add some printf in code to detect where the code had ran.
printf output.
```
printf is ready
endif----- …
-
Hi,
I have Foxy installed on an lxc container and am trying to build the micro-ROS for olimex-stm32-e407.
Following the wiki https://micro-ros.github.io/docs/tutorials/core/first_application_rtos/nu…
-
Hi
I'm trying to use the generate_lib configuration to later use it to link to my project. I'm using FreeRTOS on an STM32 F7 chip, so I have my custom pipe based on a CubeMx generated code. I'll be…