-
Hi Silvan,
I really love the interface and you always respond the question so fast and update in next version.
I am wondering whether it is possible to use MJPEG stream once open the interface? if th…
-
This is noticeable especially when looking at CLI with black background.
In mjpeg stream, black background is not completely black, color picker indicates RGB(16,16,16) a very faint grey.
In webrtc(…
-
Is it possible to run a live pipeline consisting of 1080p30 MJPEG HW decoding followed by H.264/5 HW encoding with mpp, ideally using the GStreamer plugins, on a RK3399 or a similar chip?
coudy updated
4 years ago
-
Can I use the put_packet/get_frame interface to decode MJPEG ? After doing that I found there is no frame from the output side.
-
### DO NOT REMOVE OR SKIP THE ISSUE TEMPLATE
- [X] I understand that I will be **blocked** if I *intentionally* remove or skip any mandatory\* field
### Checklist
- [X] I'm reporting a bug un…
-
I have a project where I would like to present the video as mjpeg over http. I know the info is in the Onvif standard how to do this. But its alot of info to go thru.
Perhaps someone here could poin…
ghost updated
5 years ago
-
Hello, I'm trying to work with Processing3 on Windows 10 and an USB camera which can be set to stream in YUV or MJPEG mode.
The YUV mode works nicely but MJPEG does not work at all: all camera modes a…
-
The robot still turns on spot without moving forwards when using the straight line navigation.
Tested with F13/RB36 on https://github.com/zauberzeug/field_friend/pull/96, but I don't think it is rela…
-
Hello everyone. I ran into a problem when receiving an MJPEG source stream. I use a TP-LINK Tapo C110 camera with the following configuration:
```
api:
origin: "*"
log:
level: error
strea…
-
Probably this isn't a common problem, but I'm running octo4a on a TVbox with a Tapo C100 Camera (this is the setup I have available).
Since the camera is on RTSP I cannot find any tutorial to make …