-
Hi,
I'm creating a new integration to Growatt Model M6000HX-48-BP using Home Assistant and serial port /dev/ttyUSB0. Once I defined the serial port parameters I checked the log and found the follow…
-
### Which node-red-contrib-modbus version are you using?
5.31.0
### What happened?
I am testing this library to read the Delta PLC DVP14SS2 controller, which operates in Modbus ASCII mode. I …
-
### Describe the bug
Intermittently, the integration will stop and all the entities will zero out. Reloading the integration _usually_ seems to fix it, so it sounds like a HA/integration issue as opp…
-
Add an option to scan for inverter modbus device IDs or configure manually when setting up the integration.
-
### Which node-red-contrib-modbus version are you using?
5.31.0
### What happened?
I am using Node-RED with Docker. When I configure the node-red-contrib-modbus module, a segmentation fault error o…
-
Имеется контроллер для управления внутренним блоком кондиционера mitsubishi
https://www.mitsubishi-aircon.ru/product/controls/Descriptions/ME_RAC_LON1_MBS1_ENO1.pdf
подключен по modBus к wirenbor…
-
**Describe the problem you have/What new integration you would like**
A climate platform where you can link any sensor as room sensor and any number as target temperature so that this can be link…
-
### Which node-red-contrib-modbus version are you using?
5.25.0, 5.31.0, 5.40.0
### What happened?
Modbus-Flex-Getter stops sending requests to modbus server after a specific set of messages
### …
-
What I did was install Arduino IDE 2.3.2 and installed the esp8266 by ESP8266 Communuty package.
Then I installed the library and loaded the example file and compiled it, but the following error occu…
-
To sum things up, only 1 of 5 Pis was "seeing" the SunSaver MPPT device. I had a hunch and did some digging and found that the MODBUS address needs to be set to 1. Using Morningstar Solar's software t…