-
I'm not sure if this is the right place to report this issue so please kindly redirect me if necessary.
I've been using nut for a few years on Ubuntu 14 and 16. I recently did a fresh install of…
-
i have kstar MP 3k S any idea which driver might work ?
this is how it shows in lsusb
```Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port / Mobile Action MA-8910P```…
-
Can you point me where to start to write driver/sub_driver for the Eurocase EA200LED 1200VA?
I have collected USB communication (Send/Receive on beginning of line are not part of comm) :
```
> [\x80\…
-
I'm using nut-upsd image on a RPI4 for a tecnoware Era Plus 1100 and evything works fine except in the following cases:
1) in case I disconnect and reconnect the USB on RPI
2) UPS for some strange…
-
**'upscmd pw9125 beeper.disable'** command says 'OK' but it does not change the status:
> upsc pw9125
ambient.temperature: 28
ambient.temperature.high: 52
battery.charge: 100
battery.charger.st…
-
nut-driver.service as well as upsdrvctl is unable to start any of my snmp-ups devices individually or collectively.
These are the errors I'm seeing:
[root@xxxxx run]# upsdrvctl start nutdev7
N…
-
Greetings, my UPS is this cat - https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1350pfclcd/ - it is connected via USB to my Qnap NAS and is detected and monitored in the OS integration. I…
-
**Is your feature request related to a problem? Please describe.**
after so many tries and errors of installation on my own macbook, would you please release macos cli and macos nut-gui for download
…
ghost updated
3 months ago
-
For some reason, it takes many seconds (>20) to minutes for ups.status to get updated.
No connection errors in logs. Is this a timer or driver related problem? I hope it's not the APC UPS reporting…
-
`Công ty TNHH Giải Pháp Kỹ Thuật Số DH - Mẫu: DH-08.1: Phiếu ghi nhận lỗi phát sinh DHG.Hospital 3.1`
PHIẾU GHI NHẬN LỖI PHÁT SINH
#
- ![nguoi_ghi_nhan](https://img.shiel…