-
Before submitting a problem please check the troubleshooting section
https://docs.openmqttgateway.com/upload/troubleshoot.html
**Describe the bug**
I have a vanilla Altronics weather station. It …
-
### Current Situation
In the descirption of the pulse slicer the -s flag is set for rtl_433 -> Wireless M-Bus Mode C&T, 100kbps (-f 868.95M -s 1200k)
However I am not sure how to set it for the …
-
**Describe the bug**
rtl_433 module is not in list in user_config
**To Reproduce**
Steps to reproduce the behavior:
open user_config and look for rtl_433
**Expected behavior**
add method to …
-
### Current Situation
I used PlatformIO to install the "OOK_Receiver" example on my LILYGO® LoRa32 V2.1 ESP32 (SX178 433MHZ) development board.
The serial log shows that it is properly getting signa…
-
I want to use passive mode to listen for the broadcast messages that get sent from the SwitchBot Meter. They seem to be sent when temperature or humidity changes.
In my testing I am able to see the…
-
Hi,
is it possible to add support for an Inkbird ITH-20R for esp32 with cc1101 i am not sure how to add additional decoders. a link for it working with rlt_433 is , https://github.com/ehagan/rtl_4…
-
![image](https://github.com/atc1441/ATC_MiThermometer/assets/1297392/bda98452-bb6c-4b1a-b236-a44aede60064)
It seems that the way to update firmware using telink flasher has been forbidden.
-
### Current Situation
Edit: Ok I'm wrong it's listed under a different number
Registering protocol [54] "Watchman Sonic / Apollo Ultrasonic / Beckett Rocket oil tank monitor"
Not sure why it is …
-
**Describe the bug**
Executing [mosquitto_pub -t home/OpenMQTTGateway02/commands/MQTTtoBT/config -m '{"extDecoderEnable":true}'](https://docs.openmqttgateway.com/use/ble.html#advanced-setting-up-an-e…
-
Consumption optimization expected?
The total power consumption is reduced when CPU CLK to 16 MHz.
The power consumption for battery measurement is the short measurement cycle. The number of voltag…