-
vilim updated
3 years ago
-
/I wanted to do the same, can i do the same using areduino nano or arduino one? what calbs do i need? how can i implement the logic of the button when pressed? how can i return energy to the candle an…
-
**Describe the bug**
Issue with "Music" blocks. The buzzer does not seem to be functioning on A0 when using it with the SparkFun RedBoard Turbo under MakeCode Beta site.
**To Reproduce**
When att…
-
After integrating Ecowitt Wittboy all sensors except rainfall sensor (Piezo) are shown.
Ecowitt App is showing all sensors working (including rainfall sensor)
Link to Hardware: https://shop.ec…
-
For some choices of piezo position it looks like the offset gets moved when transitioning from one modality to the other. There should probably be an option to readjust galvo offset after calibration …
vigji updated
2 years ago
-
I had one of these connected to a rPi and it worked fine for about a month. Then I decided to hook it up to an Arduino and did not read the datasheet. I've fed 3.3V into the 3.3V and now it's seemingl…
-
```
If the driver can handle PWM in kHz, move to a PWM pin so a piezo can be driven
to make nice sounding warning chimes.
```
Original issue reported on code.google.com by `s2108...@gmail.com` on 25…
-
When micro:bit is connected to USB, its LED display alerts user to an i2c error when PWR is switched from 1 to 0.
1. Set PWR to 1
2. Use parallax.py library from 0.3.4 branch's library folder if y…
-
OK so I have installed a piezo probe. Occasionally it gets a false trigger and seriously screws my mesh up. I suggest that we set a deviation limit, so for example, if the distance between my highest …
-
Issues:
I got some longer wire, but the inside of the wire is just lots of smaller wires which did not surprise me. How do I get it to stay in my breadboard?
I got a soldering iron and now I fee…