-
symbol = mx.symbol.load_json(os.getcwd() + '/model/resnet-50-symbol.json')
then：
[14:40:44] /home/xiaomin/wxm/mxnet/dmlc-core/include/dmlc/logging.h:235: [14:40:44] /home/xiaomin/wxm/mxnet/dmlc-co…
-
我试图转到MNN，MNN不直接支持mxnet，需要转成onnx, 我用mxnet自带export_onnx接口报错，提示batchnorm出错呢：
onnx.onnx_cpp2py_export.checker.ValidationError: Unrecognized attribute: spatial for operator BatchNormalization
-
I had some pcb's made and tried to build the 82s100 replacement.
I build the lpt cable to program the cpld but I keep getting an error.
"hardware and software settings mismatch"
Any suggestions?
…
-
USB keyboard doesn't works in BMCPlus4. Only uppercase and lowercase letters work if you use a USB keyboard.
I also can't set up the 1551 Drive model despite having inserted the Roms in the PLUS4 …
-
15Khz support for the NES core would be wonderful because I could get a beautiful RGB output instead of the dull RF of the real hardware.
I can see that it is done using the `scandoubler_disable` par…
-
`config.json` will be constructed like this.
```
"team" : [
{ "name" : PLUS, "ip" : 0.0.0.0, "service" : [ {"name" : bof, "port" : 8888 }, .. ] } , ...
],
"service" : [
{"name" : bof "flag" …
-
Before you open an issue, please make sure you have tried the following steps:
1. Make sure your **environment** is the same with (https://mace.readthedocs.io/en/latest/installation/env_requirement…
-
Before you open an issue, please make sure you have tried the following steps:
1. Make sure your **environment** is the same with (https://mace.readthedocs.io/en/latest/installation/env_requirement…
-
Hi,
I am new to the DeepLearning area. I have the Jetson TX2 board purchased. I would like to run the inference applications for Image classification and object detection on Jetson TX2 board. I hav…
-
Greetings
Is it possible to add SID support to C16?