-
Hello,
I have been attempting to use the Pytrack 1.0 with DFU 0.0.8 and a LoPy4 running the following firmware:
`(sysname='LoPy4', nodename='LoPy4', release='1.20.2.r0', version='v1.11-783192e o…
-
Using LoPy:
```
(sysname='LoPy', nodename='LoPy', release='1.9.2.b2', version='v1.8.6-796-g489fa
fa0 on 2017-10-15', machine='LoPy with ESP32', lorawan='1.0.0')
```
If i do:
```
import builtin…
-
Please include the following information when submitting a bug report:
* I'm using a GPy connected via an Expansionboard v3.1
* The firmware version you are using. You can get it by executing the …
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
I'm using the ESP32 board.
* The firmware version you are using. Yo…
-
Hello,
Here is my material :
- Pycom expansion board v2.1A
- Firmware : (sysname='LoPy', nodename='LoPy', release='1.20.2.r4', version='v1.11-ffb0e1c on 2021-01-12', machine='LoPy with ESP32',…
-
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
G01
* The firmware version you are using. You can get it by executing the following Python code at the REPL:
Pycom MicroPython 1.18.1.r2 […
-
**Describe the bug**
When using "Pymakr: Start development mode .....", I get an error from VS Code saying
[Pymakr] Failed to run command: startDevMode. Reason: Cannot destructure property 'projec…
mkelk updated
8 months ago
-
tried now multiple versions of MicroPython, up to 1.13. But always get the same error on my ESP32 NodeMCU...
Already split my files as much as possible, but the problem is the MicroWebSrv2 code...
…
-
Use of LoPy4, firmware 1.20.2.rc10 (jan 2021)
Issue with sending LoRa datagram to TTN V3 Stack after restore LoRa nvsram.
Migrating LoPy4 from V2 to V3 The Things Network Stack went ok after power…
teusH updated
2 years ago
-
The Pycom board is a W01 (Wipy version 1.20.1.r2 (Micropython 1.11 , ESP32 v 3.4.0)
```
(sysname='WiPy', nodename='WiPy', release='1.20.1.r2', version='v1.11-06dfad0 on 2019-11-30', machine='WiP…