-
The current HW/FW is working well but the consumption is very high. Measuring each 15 minutes and connecting each 60 minutes in order to publish a measurement consumes around 40-50mAh. This consumptio…
-
Hey, I am trying to connect with m95 to the Arduino for communication between the client and AWS IoT, But have some issue I don't know how I upload my CA,CC and Private key with the command AT+QSECWRI…
-
Can you share some details on following APIs?
unsigned int api_getRandomSeed(void);
unsigned int api_getMicro(void);
void api_delayMicro(unsigned int us);
I see that they are inside the static…
-
> http://www.liontron.cn/showinfo-147-317-0.html
> 测试时间: 24-03-26. 发现2处异常:hdmi 和 蓝牙
-
Hello, just got my pinephone pro (typing with it now).
I dont get mobile data on plasma - but I do on manjaro phosh. On phosh it requires me to input APN then works even after reboot etc. I do get …
-
**Is your enhancement proposal related to a problem? Please describe.**
Some GNSS modules have the ability to switch between multiple antennas (internal vs external, etc). It would be good if the API…
-
I have ppp using `/dev/ttyS0`. Also trying to use `/dev/ttyUSB2` for receiving SMS with smstools.
When ppp0 connects I get this in `dmesg` and `/dev/ttyUSB2` goes away:
```
[ 40.330141] usb 1-1.3…
-
Hi all,
I want to understand the internals of the diag protocol practically so I'm trying to manually send and receive commands to the /dev/diag interface I've recreated the following steps but don…
-
The time to be used in TF should be always provide the RTC. The RTC is synchronized with NTP only first time of connection and each N hours (set in Definitions.h). If NTP is not available, time will b…
-
Hello I've previously used a sparkfun SARA R4 shield using the UBLOX LTE Modem.
The modem works on 1.8V TTL but the sparkfun shield includes two level shifters 5V -> 3.3v and 3.3v to 1.8v feeded by…