-
-
I have the homeduino plugin running. Switching lights on works perfekt via webinterface. Wheni switch the light on the web-switch changes its state.
When a switch the lights on via the common/standar…
Nears updated
9 years ago
-
Hi All,
Did any one managed to get the 15 Channel Dooya 2702 RF remote working with this library (https://www.aliexpress.com/i/32917187487.html)? I have the device in house, but it does not seem t…
-
This library works beautifully, thank you for this!
However, I spent **hours** getting started and eventually managed to find some code example in other Github issues to make my simple RF power anal…
-
The RF_DIVIDER "PD0922J5050S2HF" requires an external 100 Ohm resistor that is called isolation resistor between two output ports, but that is missing in the circuit.
This issue degrades isolation be…
-
Hello,
maybe you are familiar with doppler "radar" modules for detecting motion using RF energy reflected by human body back to detector. Like the famous RCWL-0516 (using ~3.2GHz band):
![image](h…
-
There is about 0.6 dB AM distortion at 33 dBm full AM keying on two different time scales: one on a few ms and another on a few 10 ms timescale.
Is this expected?
![image](https://user-images.gith…
-
Can you release documentation that shows all available configuration options for the RF Driver `.cfg` config file?
I'm able to get the driver working, but having an issue creating a valid LTE signa…
-
Hello Joachim, thanks for the very nice work!
I was looking for a way to bitbang a RAW rf signal but cannot figure out how to do it with rfctl.
Do you have any example to share with me please?
…
-
*mcpratt:*
this issue is also present on master branch
board is EPG600 (not added yet)
this probably also affects ESR600 which is the same hardware
and other boards with RT5592
5 GHz wirele…