-
I have just purchased a new [Cocoon Connect LED Strip](https://cocoonproducts.com.au/cocoonconnect/smart-led-light-strip/) from Aldi and have successfully acquired the I’d and key of the device and se…
-
Hi Henner,
I just want to report that running your library on picore results in a perfect frame. No flickering or artifacts.
I had previously tried with raspberry-stretch lite and the realtime …
-
### Describe the Bug
The LED Config for the 80% Q3 HE uses the layout for Q1 HE, a 75% keyboard.
### Keyboard Used
keychron/q3_he/ansi_encoder
### Link to product page (if applicable)
h…
-
### Govee Device SKU
H608D
### Govee2MQTT Version
2024.07.13-82ddc6e9
### Describe the issue
only half of the strip is addressable: H608D has 50 leds (10 segments 5 leds each) but HASS only sees …
do285 updated
3 months ago
-
**Panel description:**
LED P5 OUTDOOR RGB SMD2121 HUB75 64x32 1/8 Module
**Dimensions (in pixels):**
64x32
**Scan factor:**
1/8
**Chips on rear side:**
ICN2012, ICN2037BP, MW245B
![CHIPO…
-
hey there
i'm using rpi computer module
does any one test this library with rpi cm3
or it will work ?
-
### What happened?
Main issue
Controlling the RGB LEDs with LED driver 5110.40 (iluminize.js) is working fine but it's not possible to control the white LEDs of the RGBW LED stripe. The white LEDs…
-
### Describe the bug
Home Assistant Integration uses depreciated flags.
Deprecated flags [rgb, color_temp] used in MQTT JSON light config for handling color mode, please use `supported_color_mod…
-
Hi,
I have a K551 which I would love to control with this program.
Physically the K551 model is almost identical to K552 (which is in the supported list), except it also has a Numpad.
I was…
-
The SparkFun-LED library parts LED-RGB-CACLEAR, LED-RGB-CADIFFUSE, LED-RGB-CCCLEAR and LED-RGB-CCDIFFUSE all have overlapping pads.