-
As a subissue of https://github.com/machinekit/machinekit/issues/586 I'll try to get history, questions, contemplations, answers, tips and all what passes collected into this issue.
During the proces…
-
Clocker requires a reference clock. We observe that when 100 MHz 0 dBm is applied to the SMA input the output contains high-amplitude spurious features. Increasing the input amplitude to 12 dBm resolv…
-
Port RIGOL `Waveform data` JS to flow
-
Hi, I want to communicate with the instruments with pyvisa, but the error occurs when I use "read_raw" command.
I want to read the data of wave in the oscilloscope as the binary data, but it …
-
I am figuring out the best approach to have a pipeline running for all my kicad projects stored inside Gitlab.
I am currently seeing therefore three approaches:
## Most general one:
- Inside …
-
Hi, I bought a dps5015 fairly recently from a distributor called "KKmoon" from Amazon EU, and I quickly put in opendps after I did some testing on the stock firmware.
Two problems as I can tell rig…
-
## Setup
- Arch Linux
- scopehal-apps (master: [`c6be1427bb`](https://github.com/glscopeclient/scopehal-apps/commit/c6be1427bb7b055b5bbe14734d864639c0145280))
- scopehal (master: [`148899e234`](h…
-
just tried tone(4, 3520), and the generated frequency is way off. I measured ~2750Hz with my multimeter. I didn't hook up my scope, but the sound is distorted, like it is not a clean 50% duty cycle …
-
Greetings Brian,
Couldn't find how to get in touch (linked-in won't let me, twitter account from there is down) so am using this. Not writing about an issue, just some thanks.
I've been using e…
-
Most budget friendly iTag bluetooth trackers nowadays have the Lenze st17h66 mcu (some old stock comes with the st17h26, which is an entirely different architecture, discussed in another issue #?)
Th…