-
**Summary:**
Sensors options and device design discussions and decisions.
-
**Is your enhancement proposal related to a problem? Please describe.**
With the current implementation of the jedec spi nor driver only devices are supported that have the ability to perform 4KB, 32…
-
We got the read_sfdp_data issue if SFUD_USING_QSPI enabled.
Its byte order of address should as below.
[read_sfdp_data](https://github.com/RT-Thread/rt-thread/blob/master/components/drivers/spi/s…
-
**Summary:**
We need to Add integration of an external SPI flash to the NUCLEO-WL55JC board.
**Why do we need this?**
To be able to develop the FW in parallel to the HW development.
*…
-
HydraBus is supposed to be binary compatible with the Bus Pirate, so flashrom should work out of the box (flashrom has a bus pirate mode).
However, when trying to ID a chip using flashrom (the most…
-
**Summary:**
With the arrival of the node V0.1 PCB, we need to test the first prototype to ensure it is an acceptable prototype that can be used in the development of the device firmware.
The…
-
我按照readme里面的方法尝试了一下 ,依然显示有问题
\ | /
- RT - Thread Operating System
/ | \ 4.0.1 build Mar 12 2020
2006 - 2019 Copyright by rt-thread team
[SFUD] Warning: Read SFDP parameter header infor…
-
Hi,
The Nordic nRF52840 PDK has an external flash built-in, connected to the nRF52840 by QSPI.
The driver is available using the nordic SDK, but it's not in Zephyr yet.
Has anybody already p…
-
Running ``fdp`` fails on macOS:
```
$ touch empty.txt
$ fdp -Tdot empty.txt
Warning: Could not load "/Users/xxx/miniconda3/lib/graphviz/libgvplugin_pango.6.dylib" - It was found, so perhaps one…
-
To test the quad spi driver, I created an example application and pushed it here: https://github.com/maclobdell/mbed-os-example-quadspi-mpl (master branch).
It uses the latest qspif-blockdevice (#…