-
Thanks for the help in advance.
I'm trying to use TeachingTech's Marlin version (with BLTouch enabled). After a few hours reading because I could compile it (VS Code and PlatformIO) I finally got i…
-
### FileNotFoundError:
When I try to compile I get the following error?
`> Executing task: C:\Users\r_vei\.platformio\penv\Scripts\platformio.exe run --environment STM32F103RC_btt_512K <…
-
As in the title, is it possible to flash the bootloaders using a raspberry or Arduino device or are the ST link devices necessary, just thought id ask beforehand as i have both an uno and multiple ras…
-
### Description
On the printer itself:
When I home the printer via the LCD it home’s correctly. Then I choose level bed, the printer starts levelling but after the first probing it freezes…
-
I m trying to set the offset of the Bl touch , but Skr mini E3 dont save it to memory (M851 Z-0.9 and m500), after i restart the printer, m851 is Z0.00 , for the moment i have put the offset value i…
-
This is a continuation of #45, I got to believe that someone with knowledge of how boot loaders work can figure out how to add the USB connection for the SKR PRO V1.x board or the GTR V1.0 board.
I…
-
Hi
I was tried several ports and combinations which took about 3 hours but the relay doesn't work with m81 command, can somebody share their skr 1.3 used pins and firmware changes for this relay?
…
-
Why, always geting this... either it is on Z or E or Y, seems random. But same error... so sick of it. So much wasted print time and plastic!!
Two brand new ender 5 plus with klipper, and two new …
-
I have tried to compile the new firmware as I need to change the BLTouch offsets in relation to the nozzle as I have a non-standard setup. I've downloaded and extracted the firmware made the changes f…
-
You have this:
![image](https://user-images.githubusercontent.com/122113075/232467694-43bceb4d-a954-4b92-8f30-5fd8b92d2733.png)
Where is the Marlin image???
How to I flash Marlin, when Klipper is i…