-
In version 3.0.0 when Home Energy is included Its of importance when a smart meter is used to set the cumalative measurement option to true.
I believe this should be possible to do for the measure…
-
Zwift (widows10) does not show up in the list of smart trainers on the device screen.
It does show up in the list of power meters and cadence sensors.
-
The Fronius Smart Meter appears in the device list, but is not displayed as an AC load. The problem occurs with the Venus OS v2.92
-
Denne fejl kommer konstant i Home assistant, og sensoren opdatere ikke som forventet. Den er konstant med få opdateringer til værdien en gang i mellem. Jeg har genstartet HA flere gange, deraf at den …
-
### The problem
After updating to 2024.8 beta (it stopped in the latest nightly before the beta) the gas meter is not working correctly anymore. This might to be related to [Upgrade dsmr-parser to …
-
P1-dongle pro shows current directly out of the P1 telegram. Unfortunately Dutch Smart Meters give only integer values for the actual current and voltage. A refined current value could be shown by usi…
blolp updated
6 months ago
-
### The problem
In Energy dashboard, there is an entity **sensor.consumo_energia_mensal_kwh** (unit kWh - monthly Utility Meter), with a tariff (energy cost) associated to it. Then, Home Assistant au…
-
**Describe the problem you have/What new integration you would like**
I would like to use the slimmelezer in Austria with the Sagecom T210-D-r and the Sagecom S210 energy meter.
All informatio…
-
Hi,
The default Smart Beaconing parameters are way to agressive and tend to generate excessive packet rates on mobile stations, saturating the network.
Smartbeaconing was meant to send packet ou…
F4FXL updated
3 months ago
-
Through the Local access function one can see `volt` and `ampere` for each phase being reported at the point of the smart meter. Might these values be available in the modbus register? I have a SH10RT…