-
```
What steps will reproduce the problem?
1. Run Audio Spectrum Analyzer NOT in Debug Mode
2. Set Sampling rate to 96000HZ
3.
What is the expected output? What do you see instead?
Expected : To sho…
-
Can include this as feature, Cronjob Meteor spectrum output to i2c/spi 128x64 SSD1306 OLED?
Can cronjob oled python script at same time as meteor pass?
1) example:
https://www.youtube.com/watch…
-
Most (all) digital oscilloscopes have a variety of different acquisition modes.
Acquisition modes are tuned sampling algorithms that give you unique insights into signals. By varying the sample ra…
rgetz updated
3 years ago
-
After "fixing" issue #73, executing the same code results in a timeout:
``` python
import visa
visa.log_to_screen()
rm = visa.ResourceManager('@py')
spectrum_analyzer = rm.open_resource('GPIB0::20::…
iliis updated
8 years ago
-
Currently it fixed by feeding module with 3V3 bus, but test bench Wemos D1 worked on 5V without any issues.
Need to figure out why so.
[WORKAROUND](https://github.com/SequoiaSan/FlipperZero-WiFi-…
-
```
After using a protocol analyzer to sniff the interface between the SPEkTRUM MCU
& the tx module, I suppose DSM2 header of Open9x is inaccurate.
Both X1TXN & X1TXO had been tested.
The first byt…
-
Hi, I'm new to Arduino programming and I'm having issues with this code.
I created the ADF4350 library and imported it to Arduino IDE. I created the sketch with the setup() function provided in the …
-
This new release lets the TX wildly oscillate around 1730 MHz, while the previous 01.04 does that not. It is a drifting signal that mixes into many bands and creates funny spectrograms.
See the dif…
-
Beta 0.5 of FamiTracker (as well as it's April 2020 build) have successfully implemented automatic wave RAM allocation for the N163 expansion chip. While 0CC/forks do minimally support it, all it does…
-
Dallas and Mohit are working on a raw adc flagging algorithm. Once this is done and things understood better (thresholds used to consider a channel as bad), make an analyzer.