-
I tried to use ConfigTool to build my thermistor table with the Steinhart-Hart Equation, one of the 3 temperature points is 75.5 degree Celsius but ConfigTool refuses the .5 which makes it inaccurate …
-
If you pull regularly, you might have noticed a new sdcard2 branch. This is for implementing handling an SD card. I reviewed and wrote the code carefully, but I have no such hardware, so I rely on you…
-
is it possible to add a rc servo using the current arduino servo library? If a new mcode is added to turn the servo like in other firmwares would that work? or is there some other way of doing it?
-
I try to use teact in a Ruby on Rails application.
'require' is only supported by node, not by the Javascript engine running inside browsers.
I am trying to solve this issue with Browserify but…
-
As the title says, my printer was stuttering badly when trying to move large angles. After looking through the code a little, I'm pretty confident that it is due to the function dda_create() being ver…
-
I finally got around to isolating the gcode that causes dropped steps on my printer. I haven't tried slowing things down too much, but I'm not exactly speeding through the print either. I can reliab…
-
I saw there's branchs for lcd implementation but most of them are about reprap graphic card or i2c displays, i want to use a 16x2 display, i usualy implement it with liquid crystal at arduino, anyone …
-
Hi all,
since we are supporting more than just AVR we will have for example analog.c, analog-avr.c and analog-arm.c. With introducing stm32f411 we split analog-arm.c to analog-arm_lpc1114.c and ana…
-
The default PID parameters are assigned around https://github.com/Traumflug/Teacup_Firmware/blob/master/heater.c#L79 it might be nicer to move these out to config.h, or use some optional overrides li…
drf5n updated
7 years ago
-
Hi,
I'm starting to make a new nice menu for the new nice display. My programming skills are growing and growing but I have some issues with the current situation.
I want to have a kind of state mac…