-
Add menu option to select timer source for PWM on PB1.
Add support for Tone to directly drive that pin with output compare if that option is selected.
-
I need help with the jeelib. It compiles fine with the rather old (abandoned?) attiny core from google code: https://code.google.com/p/arduino-tiny/
But nowadays Arduino recommends this core to be us…
-
I am hoping to get 3 or 4 PWM pins on an ATTINY85 running at 10+ kHz each (20kHz would be ideal). I would like to use the 8MHz internal clock. This is going to require modifying timer0 which will bre…
-
Cuando finaliza el tono, la salida en algunas ocasiones queda en alto, y no se puede vover a escrbir con digtalWrite
-
Trying to get an sd card working with my 841 but the CardInfo Example won't compile.
`Arduino: 1.8.9 (Windows 10), Board: "ATtiny441/841 (No bootloader), ATtiny841, Disabled, 8 MHz (internal), EEPR…
-
Hi everyone,
i written a code that wake-up, from the deepSleep, the tiny85.
The pin interrupt is set by "change pin interrupt".
After it's wake-up, sends a number over the Serial with SoftwareSeria…
-
Hi everyone,
i recently bought a usb programmer https://goo.gl/ixTHbH .
I checked the connection, https://goo.gl/49LWK2 , and i immediately realized that this usb programmer uses the PB4 and PB3 to …
-
Hello @moononournation
sorry to bother. I stumbled upon your instructables yesterday and were very impressed by your work. I anted to start right away with this project. I don't have attiny85 but a …
-
Микроконтроллеры:
TINY85[V]-20SU - микроконтроллер Atmega Attiny85
ESP8266-01 (откусить 2мм пинов + снять пластиковую основу + отрезать 2 светодиода)
(если ESP8266-01s, то отрезать светодиод и один…
-
I tried to use your ATtiny core to compile a sketch for ATtiny13A which was previously compiled without problems for ATtiny85 using the ATTinyCore by Spence Konde V. 1.1.4.
I selected
Board: ATti…