-
I am using a "radio scanner" like application (OP25) to receive and decode digital to audio and then I am trying to re-broadcast the audio to my FM radio using PiFmAdv. OP25 outputting the audio via …
-
hello. Just tried out this plugin, like its very straight forward usage. Noticed that the payload that arrives at the webhook sink contains the full cookie string that the end user sent to the board (…
-
this code could receive RF 433 or 314 and repeat again with transmitter, on time without change setting code?
-
Is there a way to transmit above 250MHz. Im aiming for around 315 or 316
-
Hi, great project! Installed it today on a raspberry pi 2 and connected a Logitech c920 webcam/microphone to it. I am able to record using the webcam microphone with "arecord" however barnard will not…
-
Right now, the `smart_leds` support is limited significantly, needing to pre-allocate a buffer for RMT symbols. I'd like to send to >1,000 LEDs, but now that needs a buffer of >100kB
Building the R…
-
ESP32-WROOM-32D
mdf> version
I (2854964) [mdebug_cmd, 53]: ESP-IDF version : v4.3.1-dirty
I (2854965) [mdebug_cmd, 54]: ESP-MDF version : v1.0-48-gdf0a825
I (2854976) [mdebug_cmd, 55]: compile t…
-
Hello
I was previously running an old version of sip-ua(0.2.2) with it working perfectly on custom application.
I have upgraded to use the current master branch of the project and all is going we…
-
Doing the following:
1) Select a CAN signal and a Waveform (e.g. Saw Tooth) in the Waveform selection list,
2) Press Save configuration file
3) Leave the Busmaster
4) Open it again
5) Press Connect…
-
**_Reported by Anselmo L. S. Melo:_**
Add support for Link Layer Discovery Protocol (LLDP; IEEE 802.1AB) transmitting agent.
- [ ] GH-1797: Implement local MIB support for optional TLVs
- [ ] GH-179…