-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
Device - ESP32 DEVKIT
COM connection - Silicon Labs CP210x USB to UART Bridge
System - Windows 10
I have already flashed this device with [micropython](http://micropython.org/resources/firmware/e…
-
```
What steps will reproduce the problem?
1. insmod usbserial vendor=0x0403 product=0x6014
2. connect device
3. run connect.sh /dev/ttyUSB0 9600
What is the expected output? What do you see instead?…
-
Hi;
I'm test this with one more android device and one more ESP8266 module. I use ESP8266, HL-340 converter and OTG cable.
If I'm send AT+CIPMODE? command to ESP8266 I can't get answer. it seems lik…
-
Hi,
I'm facing an strange problem on OSX 10.11. When I upload the firmware to my esp8266 E-12 with esptool 0.4.6, the chip doesn't work fine.
The problem is that I don't know what happens when I upl…
-
Currently, it takes about 5-10 seconds to initialize an NDI camera on my computer (16" Intel MacBook Pro, macOS 12.5). This is because of the following code, which sequentially probes serial ports for…
-
If you change the makefile to use "FLASH_TTY ?= /dev/ttyUSB0" then users can override it on the shell with a different port. For example: "FLASH_TTY=/dev/tty.usbserial-AI025J3G make flash"
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…