-
Would it be possible to put an indicator in the description of those Effects that utilize multiple colors?
Like a * perhaps? ...And at this point, alphabetization of the Effects, etc?
-
Hi there,
my actual hardware is a SP511e board. All is working fine with the b3 SW, instead MQTT.
So I did my own build (config see below), but same issue. MQTT Parameters will not be saved in GUI.
…
-
## Bug report, debug log and your config file (FULL LOGS ARE MANDATORY)
https://pastebin.com/ny5c5VwW
#### Steps to reproduce
Activate HyperHDR without smoothing --> no time lag
Activate smoothi…
-
### The problem
I have a KNX wall switch that triggers sending a scene number to the bus. Using ETS (the KNX software) I can see (and generate) that message reliably. Every press is a message with …
-
* ESP hardware in use: ESP8266 with Arduino UNO
# Full esptool.py command line as run:
# Full output from esptool.py (please copy and paste all lines of output) esptool.py v2.6
2.6
esptool.p…
-
### The problem
I have a KNX wall switch that triggers sending a scene number to the bus, what I want is to trigger a random wled effect _every time_ the button is pressed and the config for that i…
-
**Describe the bug**
mapping from DMX channels to functions(shutter, red,green,blue) are not saved after reboot.
Instead they are reset to "Set to 0"
**To Reproduce**
In the DMX menu map functio…
-
Hi,
I know that WLED can sync multiple WLED nodes, however is it possible to combine them?
E.g. I have 2 separated WLED server each has 30 LEDs (Running on ESP32). Can I combine them to create a…
-
### What happened
After restarting moonraker, or on first boot, sometimes get a warning:
> An error was detected while loading the moonraker components. Please check the logfile and fix the issue.…
-
After finally finding the lamp in wled I get more issues as you can see in the pictures below. The second message comes immediately after clicking on the lamp and the first one comes after klicking on…