-
Have not been able to successfully connect to rig control using a RTL-SDR v3. Hamlib library installed is w64 version 4-4. Local host and port is 127.0.0.1:4532. SDR++ Rigctl Server is running and …
W5QJ updated
9 months ago
-
I just tried installing node-red-contrib-wsjt-x 2.0.1 and redirected my WSJT-X computer to send packets to Node-RED. It sees heartbeats just fine, but I see this:
"RangeError: Offset is outside th…
wz2b updated
9 months ago
-
/*
* Contents of token_t are opaque outside of libbsm.
*/
typedef struct au_token token_t;
It is part of libbsm, a security library originally from FreeBSD. The problem on macOS is tha…
-
**Hardware**
- CPU: i7
- RAM: 8GB
- GPU: Nvidia
- SDR: Local
**Software**
- Operating System: Ubuntu 22.04
- SDR++: v1.1.0 Nightly built May 17
**Bug Description**
Changing from WSJTX 2.…
-
I am trying to setup gqrx with wsjtx, on Debian linux, both latest stable versions, and I am getting errors on connection, because it looks like hamlib (which wsjtx uses too) by default sends some com…
-
Latest WSJT-X improved added Power and SWR display.
The IC-7300 is showing SWR but not Power with FLRig
-
Hi,
In the "quickstart" at number 7 you mention:
"Initialy the operating HF band is 17 meter (WSPR dial frequency is 18106 kHz)."
I think that should read 18104.6 kHz ?
Ben - PE2BZ
zanco updated
10 months ago
-
### How can we help?
I would like someone else to build the manifest.
### Please read and ensure the following
- [X] The installer meets the above requirements
### Please provide the following inf…
-
Are there any plans for an FT4 decoder?
Thanks & 73
andyz - K1RA
-
My 10GHz set needs 700 ms to go from receive to transmit due to the waveguide relay. So I think the audio must be delayed at least 700 ms with respect to the PTT-signal.
I could not set the TX delay …