-
### Type of request
New device support
### Meter description
Hello,
I am very sorry for the beginner question but I could not get any information from the wiki on this device and I also trie…
-
Hello!
Is it possible to use 2 CC1101 as 2 receivers working at the same time? Example: 1 CC1101 at 433mhz/1 CC1101 at 315mhz
I've seen that you can change modules with ELECHOUSE_cc1101.setSpiPi…
-
I am new to lora and arduino so I just tried out this code and schematic online but it keep saying starting lora failed
Here's the code
#include
#include
#include
#include
#include
#inc…
-
Hi, i have an iot project that i use ESP8266-01 and QIACHIP RF 433Mhz Superheterodyne Receiver. I control an on/off relay on internet and by 433mhz rf. I use this rc-switch library thanks to @sui77 .…
-
Hi,
Just stumbled on this - i have 2 blinds for blinds2go and have been using a BroadLink pro to control them by learning the RF 433mhz remote buttons. This works OK about 80% of the time so found …
-
We use MAVProxy to multiplex telemetry data from a 433MHz link (COM) and a 5,8GHz link (TCP).
If the TCP link goes down there is no way of reconnecting other than to restart MAVProxy. When MAVProxy i…
-
These stem from my use of RMT for its original purpose. My "blaster" libraries for [433Mhz](https://github.com/peterhinch/micropython_remote) and [IR](https://github.com/peterhinch/micropython_ir) rem…
-
Hello,
Just stumbled upon this project after building something similar from another guide: https://timleland.com/wireless-temperature-sensor/
It seems we both used a 433mHz receiver, but you pl…
-
Hi,
This is the first issue I write on GitHub... :)
I made several laptimer modules since a few days, and it works like a charm. I'm using Bluetooth to UART modules as recommended, but the range i…
-
I have compiled the script and uploaded to atom. I have also managed to pair the remote but on every button press the esp32 is crashing. Also the gpio 23 goes high and stays like that until hard reset…