-
Hi,
when I saw this project for the first time I ordered some modules to build a simple AIS from modules. The parts arrived mid 2020 but the project made a lot of progress and changed a lot. As the p…
-
It [has been suggested](https://github.com/w3c/vc-data-model/issues/929#issuecomment-1267697526) that the use of `@context` should be made optional. This would be a normative change to the current spe…
-
-
ubuntu 16.04
had to add -std=gnu++11 to gcc in Makefile
Still have issues...
`gcc -c Main.cpp IO.cpp DSP.cpp AIS.cpp Model.cpp Utilities.cpp Demod.cpp DeviceRTLSDR.cpp DeviceAIRSPYHF.cpp DeviceA…
unxs0 updated
3 years ago
-
MG's idea
https://github.com/astuder/dAISy/issues/11
based on success of dAISy AIS might be you could make
a small NavTex receiver connectable
via USB. And outside antenna. There is one NASA Mar…
-
hi Ed!
i had issue where audio is lagging. it is 2s playback and then 10s silence and playback again for 2s then silence back.
i have use the provided pcb and check the connection. i am using us…
-
Sometimes an AIS track seems to be "endless". This error is caused by the AIS receiver inside the AIS transponder. On the screen it is displayed as an impossible position. Something like 91N or 181E. …
AartK updated
3 years ago
-
This capacitor is not mounted when frequency is 169MHz, but If one wish to use this PCB with other frequency’s then capacitor CM2 (from datasheet page 33) is missing.
-
Please support 1920 kHz sampling rate.
It was required to work with raw data collected on a cell phone in the Android application [RF Analyzer](https://github.com/demantz/RFAnalyzer). There is litt…
-
Hi @f4exb ,
I can't add a feature when I use sdrangel server.
What i do :
- Run sdrangel server with 16bit Rx samples in a docker container.
and then :
- Open Rx0 with POST --> /deviceset?dire…