-
```
attiny10.build.variant=arduino:standard
```
This is unnecessary (removing the line does not prevent compilation) and inaccurate:/inappropriate (that variant describes the pin mapping and option…
-
Current ATTiny10 is fine for power sequencing, however In current implementation it does not do detection of a de-powering event.
The Image sensor requires strict power up and power down control wi…
-
Michal Salaban
Wed 12 Feb 2014 02:29:09 AM UTC
I'm flashing a RC model transmitter, which is based on atmega64a chip. The programmer is usbasp connected through ISP.
Flash reading works well.
Writi…
-
I'd love to use this. Unfortunately it's not working with a fresh install of Arduino IDE 1.8.9.
Per the instructions, I've put the extracted zip file in a freshly created hardware folder in my Docu…
-
is it possible to add rs485 support in the optiboot_x bootloader (I don't mind the increase in size of the bootloader)? I noticed the original optiboot bootloader has this feature added recently, is t…
-
firstly, thanks for the great work and not expecting you to fix this just thought i'd report it.
was attempting to use your core after a fresh install of windows and any compilation that didn't res…
-
Dear contributors, as you know the latest AVRdude release (6.3) does not support the ATtiny 1-series family.
I am about to start dealing with an ATtiny412 MCU and I noticed that your current AVRdu…
-
```c
volatile register gbf asm("18");
enum gbf_Flags {
MONITOR,
NEST,
MINE,
EOM,
CMD,
WHO
};
#define set_flag(flag) asm volatile("sbr %0, %1" :"+r"(gbf):"I"(flag))
#define clear_fla…
-
I'm able to burn a bootloader to an ATMEGA4809 (40 pin DIP) using jtag2updi, but when I try to upload a sketch I get the subject error:
```
avrdude: AVR Part "atmega4809{upload.workaround}" not foun…
-
Using this attiny10 board on arduino: https://github.com/kimio-kosaka/bitDuino10-arduinoTPI
The compiled code is too large. Even the "Blinky" sketch in your examples works out to 1884 bytes. Any i…