-
Hi ThoMint,Every day I will visit your warehouse to see if there is progress and updates. I think your project has unlimited potential and is pretty good in all aspects. I think I might also be able t…
-
I need some answer about that wheels, if you wanna turn 100 times for both whee lvia command "L20,R20" they are not turning same times.. ( one wheel turning 100 times other turning 101 or 99 ) your…
-
Hello,
I bought a hoverboard mainboard off ebay in order to use this firmware, hover on arrival I realized that this mainboard seems to be newer and different to the ones currently used.
It featu…
-
Вижу что вы занимались проблемой круиз-контроля для ховерборд--хак прошивки.
Хотел бы у вас уточнить, не углублялись ли вы настолько что б найти регулировку тока шага? Меня интересует повышение крут…
-
Добрый день. Перейду сразу к делу)))
Собрал базу ДД использовав мотор колесо от гироскутера. Работает, вроде не плохо. Но у меня две платы стм, на одной прошивка ВНМ, другая управляет мотором. Управл…
-
if you had a mm32spin0x board please create a new layout and hopefully help us make the blink code run on it
currently the progress is 90% complete
motor and uart control works
https://github…
-
Hello from Germany :-)
I would like to add your repo to my online compiler www.pionierland.de/hoverhack
videos: https://www.youtube.com/playlist?list=PLa9VLvJBLbTMmpslED2FMClIBv5URBMIa
But you on…
-
It would be really great if the VESC firmware included an option for trajectory/position control, beyond the single rotation currently supported. At the ODrive they recently implemented a trajectory p…
-
### Summary
Currently, the PID controller implements basics from Adrian Rosebrock's blog post [Pan/tilt face tracking with a Raspberry Pi and OpenCV](https://www.pyimagesearch.com/2019/04/01/pan-ti…
-
Im preety sure that there should be ifdef debug for that. Actually its clamped to -300 and 300. I spend smth like 5 hours figuring this out haha
from
https://github.com/RoboDurden/Hoverboard-Firmw…