-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Using the example config files for the AnyCubic Chiron, compilation fails due to missing LCD_…
-
So I run two boards for all my needs. It's a left over creality board that gets only my extruder, so that's my secondary mcu. Everything else is on an SKR 3. I have everything installed and in my conf…
-
On the March branch enabling Input shaping makes steppers noisy
Steps to reproduce the behavior:
1. Copy Configuration Pro.h and Configuration_adv Pro.h from /configurations/Voxelab Aquila/UBL to…
-
Hi,
I have had a couple of gear prints that fail get bad print results when using OcotPrint. The same gcode in repetier via a pc works perfectly without any small stops or hesitations in the movement…
-
### Bug Description
I'm experiencing radom freezes when printing with Octoprint over serial connection.
Using SKR 1.4 turbo, RPI4, directly connected to TFT serial interface (SERIAL_PORT 0).
Runn…
-
### Did you test with a precompiled firmware?
~~Yes, and the problem still exists.~~
### Bug Description
The "Z-axis" endstop shows "Triggered" in the Endstops Diag screen in the UI.
This …
-
Printer - XL 5TH
Firmware - 6.0.0
After a week or so printing with the alpha firmware, I started to get a nozzle cleaning error on TH1.
After a successful print, on the next print job, the p…
-
I am sure this has been asked before but can't find the answer. I have a BTT SKR mini e3 V2.0 with a BTT TFT35 V3 touch screen. I have been fighting the no printer attached for two days now with no l…
-
### Cura Version
5.4.0 Beta 1
### Operating System
Windows 11
### Printer
Anycubic I3 Mega (modified)
### Name abnormal settings
_No response_
### Describe model location
no
### Describe you…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
Crash and reboot after second time gcode preview.
1. Open file on sd card
2. Cancel print
3.…