-
###Description
E3V2 not booting after accidentally installing the wrong version. ive tried a few solutions however nothing seems to work. (unless im doing something wrong?)
### Steps to Reprod…
-
I have an s1 with factory installed sprite and was wanting to set max temp to 300°. That's the easy part. Hard part is trying to find the right way to configure the firmware to use the stock touch scr…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I noticed this recently:
[Link to where the warning is present](https://github.com/Mar…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
On an IDEX set up, after switching active extruder from T0 to T1, T0 parks to the endstop, bu…
-
Things I have did:
Switched slicers from Cura to Orca to no avail
Flashed firmwares back and forth.
It may be a g-code error but don't know what to do.
-
**Issue by [smager](https://github.com/smager)**
_Thursday Apr 09, 2015 at 18:50 GMT_
_Originally opened as https://github.com/adobe/brackets/issues/10863_
----
Would it be possible if Brackets cou…
-
- [ ] ResearchGate (ongoing conversation) - so far all they have done is link to OSrPRE in their Resource page of the [COVID-19 effort](https://www.researchgate.net/community/COVID-19/resources) they…
-
### Description
On Anycubic Vyper firmware 2.4.5, try to change the filament during the print.
In Cura 4.12.1, try to use "Pause at height" or "Filament Change". The printer stop, but next it wo…
-
I am having a big issue with my Z offset changing constantly, printer will print 1 good print then I do wat the instructions for the firmware says, press confirm then go into temperature settings, the…
-
@Tream733 I didn't found any package related to ws_msgs. Could you help me out with this issue. Thanks in advance.
CMake Error at CMakeLists.txt:23 (find_package):
By not providing "Findws_msgs…