-
Once in a box usb port of ESP32 may not be easily accessible. Right now the configuration is in secrets.h as compile-time constants, so recompile+flash is needed.
Ideas to solve the probem:
- Exp…
-
Hello, I have now updated from v1.2 to v2RC.
Everything looks good so far and MQTT has become much more convenient.
But since I had stability problems with Wifi, I set "auto restart" to 7200sec un…
-
### The problem
I am using a PN532 over I²C for reading RFID tags on a access-control system, so reliability is important. I found that if the PN532 module failed for some reason after being initiali…
-
i have one intel ARC750 GPU(ubuntu 22.04 HWE), and install driver as [https://dgpu-docs.intel.com/driver/client/overview.html](url), but after that, i got an blurred screen :), so i try to build kmod…
-
Hello,
I see that it is possible to activate more than one relay. But unfortunately, this does not seem to work on the mqtt side.
Currently, when presenting a tag of a user for which Access1 is d…
-
Emulate keypad for:
- super password/PIN
- card+PIN
### Notes:
1. https://www.farpointedata.com/downloads/qsg_and_ref/KeypadMode_REF.pdf
2. https://www.keyless.com/wp-content/uploads/2019/01/TP…
-
### The problem
When I put the board on deep sleep (e.g,: deep_sleep.enter), PN532 chip can be left in a state where it consumes too much power (around 20 - 40 mA). I have traced the issue to the fac…
-
Hallo zusammen,
ich hab mir jetzt nochmal Gedanken zu der automatischen 1-/3-Phasen-Umschaltung gemacht. Bin mir nicht sicher, wie viel Sinn es in der Praxis macht, aber in den Foren ist es ja ein…
-
I have re-opened this issue, see 448.
Background.
We currently use the software with a 522 reader and have 120 Hackspace members.
A member has just donated several wiegand readers and I have been…
-
### PROBLEM DESCRIPTION
Thanks for this great software even with Matter support.
Added virtual occupancy endpoint in 13.1.0.3 and it worked fine.
Planning to use it on ESP32-C3, therefore updated T…