-
using the web interface i uploaded the bluetooth-proxy to my device and it goes into a boot/abort loop. I've used this device and cable before for this project, i was going to update it to the curren…
izenn updated
3 months ago
-
### The problem
Since summer we got many update and 1 update on 2 broke reading of temperature sensor. The last one from september 29 broke again the sensor and before this one they work fine.
#…
-
Testing the 07 Oct 2024 with success on a Heat Pump MSZ-SF35/50/VE2 with WEMOS D1 Mini.
We have bought new WEMOS to complete the installation with same model of Unit.
We have copy the self code, a…
-
**Describe the problem you have/What new integration you would like**
Support HX711 sensors via I2C.
**Please describe your use case for this integration and alternatives you've tried:**
I cu…
-
I have an Wemos D1 working fine since 6 months ago. Now I want to recompile with a new reset button but I get always this errors:
E:\VARIOS\ESPHOME>esphome compile acm.yaml
INFO ESPHome 2024.5.5
…
-
When I have the following snippet in my config (which I use to enable connecting to MQTT over TLS on my other ESPHome devices):
```
esp32:
board: esp32dev
framework:
type: esp-idf
```
…
-
### The problem
Waveshare 2.9 version 2 rel 2.1 e-paper driven by ESP32 and using driver 2.90inv2-r2 is writing all text from right to left instead of left to right.
### Which version of ESPHome…
-
I've built a garage door controller in ESPHome.
I currently have an automation running in Home Assistant that sets WLED presets based on the state of the garage door. [LED Effects like this](https://…
-
**Describe the problem you have/What new integration you would like**
The _Web Server Component_ in its different versions allow to point different locations for the static parts via `*_url` co…
-
Dear @Sammy1Am @KazWolfe
Thank you very much for this component and especially that you are willing to include it in the main ESPHome core.
My setup is made of SLZ-M35FA indoor cassette unit, a PAR…