-
### The problem
The logs show this error many times: Cannot map hvac target mode: auto to homekit as only {0: , 1: } modes are supported.
I think this is because auto is not an operation mode in t…
-
Eavesdropping enabled to have HR80's present correctly in Schema (HR80 ID's not published by controller during discovery)
It appears the HR80's (once in the schema) then contribute to zone heat dem…
-
### The problem
Some integrations are not starting up anymore.
### What version of Home Assistant Core has the issue?
core-2023.6.2
### What was the last working version of Home Assistant Core?
_…
-
Hi,
Thanks so much for sharing this work. I have some very basic questions,
1) What do 'ctl_controller' and ''hgi_evo_gateway" refer to?
2) What is the design of the mqtt messages? One …
-
## What is the feature?
I would really love to see support of evohome. The current valves are very bad regarding temperature reading.
### Description
The problem is that the temperature readi…
-
Hi,
Are you planning to implement the hot water module soon?
You can see here some source code:
https://github.com/home-assistant/home-assistant.io/blob/current/source/_integrations/evohome.m…
-
Since I've upgraded domoticz from build 15369 to 15372 there is a clear memory leak. I've verified what other changes I've done but couldn't find one. To me it looks like there is a memory leak creepe…
-
very happy with this plugin, works perfect!
In my home I have two EvoHome systems (cause EvoHome is stupid..) and installed this as two separate locations, (downstairs, upstairs). I changed 'Location…
-
```
11:48:21.862 I --- 13:103760 --:------ 13:103760 3EF0 003 0000FF < Support the development of ramses_rf by reporting this packet (byte 5: )
11:48:39.094 I --- 13:107116 --:------ 13:107116 3EF…
-
Hi,
**Overview:**
So I've got domoticz on a Raspberry PI using a RF hat to sniff the packets from an evohome system. I have an eventscript that pushes Temps and Relay values to emoncms so I can ma…