-
First off, I'm impressed by the great documentation so far! I thought I would give my feedback on the building instructions after just having gone through assembling one camera. None of these were dra…
-
Hi,
I am trying to read several flir lepton sensors, and while hunting down some transmission problems i found that the SPI clock frequency changes between the set frequency and a ~1.6x slower frequ…
-
Hello,
I have a 64x64 matrix in a bottom to top C-shape configuration. I think I've made all the appropriate changes, but when I run the fadecandy smartmatrix or process examples (modified for 64x64…
-
Currently, the i2c bus to use on the Pi is hard-coded to `/dev/i2c-1` in the file `software/raspberrypi_libs/leptonSDKEmb32PUB/raspi_I2C.c`. For those who want to connect two Leptons to a single Raspb…
-
I am trying to get spi to work on Beaglebone with 4.1.21-bone-rt-r20 (but this does not matter). I had it working fine with 3.8. No matter what I do I get the spidev1.0, but the pin assignment fails…
-
HI,
I am trying to migrate the purethermal 1 code to work with my nucleo stm32f401re but its so large and complicated and i cant seem to understand how it works or what to do in order to make it work…
-
-
Hi
We have a FLIR 160x120 pixel variant; where is the resolution defined?
I see in LeptonThread.cpp and .h a PACKETS_PER_FRAME 60 and PACKET_SIZE 164 which gets divided by two and is thus suspicious…
-
Hi,
I'm trying to read the complete 14 bit values, yet it seems there's a strange bug which somewhat corrupts the pixel values. While the 'usual' pixel value is supposed to be 8192 when the scene is …