-
Hello, I have bought a LED strip from Amazon, it comes with a Bluetooth+IR controller that shows up on the Zengge app as a LEDnetWF device. I have tried adding it to Home Assistant with this integrati…
-
I tried installing `edalize` via the [instructions](https://github.com/olofk/edalize#install-it) from my fresh fork but I saw an error that looked dependency-related: Note there's a `ContextualVersio…
-
Since the PocketSDR cannot be readily found assembled, I am trying to see if I can get the proposed code to work with a single MAX2771 as found on the evaluation board
https://www.analog.com/en/resou…
-
This was found internally at Intel from some customer code. The original test case was stripped down to:
```cpp
template using enable_if_t = int;
template Ty Returns_exactly() noexcept;
struct I…
-
Alternative to #33 for battery emulation.
### Idea
* [Teensy](https://www.pjrc.com/teensy/) 4.x board t…
-
(update top-level post by ian5v request)
TLDR as title.
Longer explanation:
Observed poll rate with the PIUIO is limited to 250 Hz, but it should be _at least_ double that. To observe this, pla…
-
When I run "catkin_make", it occurs this problem.
In folder dvs_clustering_tracking/src/dvs_clustering_tracking/libcaer/include, there is no file named libcaer.h.But there is a file named libcaer_in…
-
Review the remaining 58 FC430 nodes in R1-PA-C08 (88 - 20 already in OpenShift, 10 for Observability).
create a list of any hardware issues so that we can replace them with other FC430s we have from …
-
### What happened?
When using GIF to create a preset, an error and cannot be created.
While using REPO https://github.com/ajotanc/pixelmagictool, it works well!
![image](https://github.com/Airco…
-
After following your instructions:
/Xilinx/libxpc$ sudo apt-get install libusb-1.0
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias... Hecho
Leyendo la información de esta…